Your Cart

Nothing in cart

  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
  • DC80 Green - Central Minutes Chrono
Damasko

DC80 Green - Central Minutes Chrono

Write a review
In Stock
Title
Send product enquiry
May we assist you?

Please use the form below to send your enquiry about DC80 Green - Central Minutes Chrono.

DC80 Green - Central Minutes Chrono

Write a review

The Damasko DC80 Green is made by Damasko Watches of Germany. The watch is made in-house by Damasko. Many in-house technical innovations are found in this fine timepiece alone.

Damasko DC80 Green with In-House C51 Chrono Movement

The DC 80 Green project is based on a patented chronograph development named C51, based on the proven Valjoux 7750. The benchmark for the modification of the caliber 7750 was to significantly increase the readability of the chronograph function. For that reason Damasko put our main focus on the technical realization of a jumping 60-minute stop hand out of the center.


This new patented construction allows to record stoping times even more easily, faster and more accurately. The Lemania 5100 movement so far set a pattern for a clear and unambiguous readability.

Damasko's new construction has two advantages in terms of readability:

First: 60 minutes are now shown in just one complete turn of the center hand rather than the usual 30 minutes, while the assigned minute scale is counted over the full dial.

Further advantages of this movement modification are the possibilities of adding an independently adjustable second time zone, which can be operated by the crown at 3 o’clock.

Central minutes chronograph - Lemania 5100 functionality


The DC80 Green model signifies a new chronograph line with the most diverse increments of Damasko's new caliber C51. All parts required for the new C 51 caliber, such as plates, wheels, pinions, etc. are produced in-house in Damako's manufactory.

The ice-hardened case is now synonymous with Damasko. The C51 movement sits within an anti-magnetic cage resistant up to 1,000 Gauss. The 42mm case uses the Damasko patented bezel system which is CAD/CNC designed and engineered. Hardened components guarantee that the bezels ratchets will never wear out, or become loose. No other bezel available offers that amount of preciseness and performance even under harshest conditions. The watch case is made in-house by Damasko and features the industry's toughest material yet. The material is called "ice-hardened, nickel-free stainles steel". What is so unique about this steel is that they are absolutely nickel-free, offer a good corrosion resistance, and can be tempered up to 64 HRC/800Vickers which is four times the hardness of every other steel currently used in the watch industry. And this ice-hardened steel is used for the entire case, crown and pushers.

Given all the specifications, the watch is just 13.7mm thick. This is quite the contrary to Lemania 5100 powered watches which are usually at least 15-16mm thick due to the thickness of the 5100 movement. The DC 80 Green is water resistant to 100m with a screw down crown.

Damasko proprietary ice-handened case, crown, pushers

The crown system is also another patent of Damasko. After extensive research Damasko developed a decoupling screw-down crown which is constructed according to standards derived from mechanical engineering. The use of a hex bolt with 2mm width across flats and the fact that the entire crown, including shaft, thread etc. is made from our patented hardened steel (60-62 HRC) results in a longevity which is second to none.

Crown and pushers are also equipped with our patented lubrication cell which ensures a smooth action and lubricates the shaft and the gasket. The tubes of both crown and pushers are, according to industrial engineering, screwed into the case using a special key. Almost every other watch manufacturer makes use of an inferior press fit tube.

Super Glow In The Dark Performance w/ SuperLuminova C1

Yet another Patent found in this watch is the Gasket system. The new gasket system overcomes the common problem of moisture and dust ingress during the operation of the crown and pushers.

Every Damasko watch features an important technical detail which is not visible at first sight but has a major influence on its accuracy under harsh conditions – the anti-magnetic cage. Only very few mechanical pilot’s watches are equipped with this feature.

In short, if you are in the market for a chronograph and appreciates good craftmanship, the DC80 Green is one of the few (if not the only) in-house chronograph you can get. Feature packed with specifications like the scratch resistant case, the anti-magnetic properties, inhouse movement with central minute/second chronograph counters and a rotating bezel to sum it up. All these for under USD$2650 is quite a bargain. The nearest competitor brand from Frankfurt is at least twice the price.

ON THE WRIST

 

Specifications

icon-movement

Movement

• Damasko Calibre C 51. Largely developed with in-house components. • self-winding, mechanical movement • 25 jewels • 28,800 bph • Shockproof according to DIN 8308 • Anti-magnetic according to DIN 8309
icon-dial

Dial

• Matt black with crosshair pattern, and green indices coated with luminous compound.
icon-case

Case

• Stainless steel, nickel-free, bead-blasted. Super scratch-resistant. • Ice-hardened to 60 HRC or 710 Vickers • Integrated anti-magnetic inner cage, anti-magnetic to 80,000 A/m or 100 mT • Sapphire crystal with anti-reflective coating on both sides, AR coating on the underside only, available on special request • Crystal gasket resistant to UV radiation • Solid screw back with O-ring Viton gasket • All gaskets made from Viton which offers a premium chemical resistance and which is superior to most other materials used in the watch industry • New patented crown and pusher system, crown stem and pusher shafts are machined with minimal tolerances and leave almost no gap between pusher/crown and case, but nevertheless do not scratch. Crown and pushers are also equipped with a permanent lubrication that eliminates friction • Screw-down crown with protective shoulders • Crown, pushers, and tubes hardened to 60 HRC • Bi-directional rotating bezel with exact minute engagement working with patented ceramic bearing • Sealed luminous dot • Protected from the intrusion of dust by gasket element • Hardened and scratchproof bezel insert finished with extremely abrasion-proof Damest layer with a hardness of 2500 HV • Two optional bezel inserts: 60-minute countdown or 12-hour ring (according to US military specifications) • Water resistant to 10 bars/100 metres according to DIN 8310 • Crystal has a secure fit even in case of a sudden negative pressure
icon-strap

Strap

• High quality leather strap with rubber lining, Green and White stitching. • Bead blasted steel buckle
icon-dimensions

Dimensions

Dimensions: • Case diameter: 42.00 mm • Overall diameter including the bezel: 43.80 mm • Overall height: 13.70 mm • Lug width: 22.00 mm • Weight without strap: 106 grams
Comparison Chart

No watches in comparison chart

Artboard 1
Artboard 1
Maker

Movement

Case

Lug width

Water resistance

Dimensions

Maker
Movement
Case
Lug Width
Water resistance
Dimensions