• Authorised Dealer
  • Extra 180 Days Warranty
  • Worldwide Shipping
Watches > Ennebi Watches >

Titanic Black (Ref. 5218-MM)

Add to cart
  • Description
  • Specifications
  • Send Enquiry

This unofficial name points at a watch designed and built by request of an english collector. It has to be put on the diving gear and it should be read by divers (in particular by incursori) who are breathing pure oxygen. For the design and setting-up of this watch, ENNEBI‘s designer Alessandro Bettarini (ENNEBI) did not use as reference either watches currently on sale, ot watches from the past, or any prototypes. Titanic‘s remarkable sizes are determined exclusively by operational needs, as for all the watches of the same kind, and several new technical features were taken under consideration to design this watch.

Let’s consider the images at the bottom. Titanic is made of stainless steel AISI 316 and it has some peculiarities that make it unique with respect to other watches for divers. The lever located on the left side of the watch, that is near to the upper lug on the opposite side with respect to the charging crown (the lever can roll away into the watch), is used to block the bezel. When the lever is out (open), the bezel can rotate freely in both directions. The bezel can be dismounted without harm the water-tightness of the watch. It can be removed by using three pivot screws located on the case back of the watch.

The charging crown has 2 gaskets that assure the water-tightness of the watch up to a maximum pressure of 30 Mpa. A O-ring seal located on the recharging axis and an energized-fluoropolymer lip seal allow to recharge and to put in action the watch even during a deep immersion.

The dial is engraved by means of a mechanical pantograph and the incisions are filled with a luminescent paste.

The standard movement we use is the 6497 on which the watch identification number is engraved. The watch identification and reference numbers are engraved in the caseback. The standard version of Titanic has micropeened finishings. Ennebi Titanic Model 5218-MM belongs to a limited serie of 99 pieces. They are finished and completely mounted when the customer confirms his order this process takes a time ranging from 15 to 45 days according to the required customizations.

The watch is delivered inside a leather case. All the tools for the watch maintenance are provided as well as the operating and maintenance booklet.

The Ennebi Fondale comes with not one but two Italian handmade leather strap attached to the Ennebi 5 piece buckle.

All Ennebi instruments come with a 2 years international Ennebi warranty.




Swiss made ETA6497 mechanical handwind movement


Engraved black dial with vintage luminous. White hand.


AISI 316L Stainless steel

Case Back

AISI 316LStainless steel. Fastened by 6 special screws.


316L stainless steel. Bidirectional rotating with bezel lock.

Bezel Pointer

Stainless steel brushed with engraved numbers.


Stainless steel thick "pancetta" crown




Domed organic glass


2 X Ennebi sign Italian made leather strapp with Ennebi buckle

Water resistance

1,000 feet / 300 meters


65mm in diameter excluding crown, 22.5mm thick

Power Reserve

~40 hours


Guaranteed 2 year

Please use the form below to send your enquiry about Titanic Black (Ref. 5218-MM)

  • Thank you for your enquiry. We will get back to you shortly.
  • Titanic Black (Ref. 5218-MM)
Back to category
Please wait while we process your request.
Join our mailing list